Bag Gripper Release and Stack Layout

Table of Contents

Bag Gripper Release and Stack Layout

A bag palletizing layout needs room for the gripper to leave the stack after placement. Start the review with the filled bag, the tool in its release position, and the neighboring bags already in place. A destination coordinate alone cannot describe that exit. For a proposed cell, draw the release and withdrawal movement alongside the layer pattern before committing to tool geometry.

Video overview of the application context. The footage supports process observation, not model-specific performance, safety, or acceptance claims.

The last part of the placement deserves its own drawing

At 00:14, the video shows the covered robot and bag gripper moving between the conveying area and the pallet. At 00:24, the tool is close to the stacked bags. These views make the relationship between the tool and the receiving stack visible; they do not provide a measured clearance or a transport-stability result.

Bag gripper positioned near bags on a pallet
00:24 — The gripper and existing stack share the placement area. This frame does not measure the available exit clearance.

For an application review, mark the bag’s intended support area first. Then add the gripper’s outline while it releases, lifts, and turns away. Include fingers or other projections that extend beyond the carried bag. A layer pattern that looks workable when represented by filled rectangles may need a different withdrawal direction once the tool is included.

The bag palletizing application guide identifies filled-bag behavior, pickup orientation, and pallet pattern as selection inputs. Those considerations support using an actual filled sample for the layout discussion. They do not identify the material or contents of the bags shown here.

Separate three questions at the pallet

Question Useful input for the review What remains to be demonstrated
Where will the bag be supported? Filled-bag outline, pallet edges, and adjacent bags Placement under the agreed range of incoming conditions
How does the tool release it? Open and closed tool outlines, including service lines Release without an unintended interaction with the load
Where can the empty tool go next? Withdrawal path and the next pickup direction Clearance along the connecting movement

Treat these as proposed review questions, not as functions confirmed in the filmed cell. If the tool changes width or uses a different release mechanism, revisit the drawing at the relevant corners of the layer. Likewise, a different pallet location changes the geometry even when the programmed bag pattern is unchanged.

A published bag-palletizer configuration lists adjustable bag width, pallet handling options, and multiple layer arrangements. These are features of that particular solution. Their useful implication for a project brief is to state which product and pallet changes the proposed cell must accommodate, rather than assuming those functions are standard on every installation.

A neat stack is a starting observation

The final warehouse view shows stacked bags but supplies no record of bag damage, load movement during transport, or performance across a production range. If transport stability matters to the purchase decision, agree on how a complete pallet will be checked after the relevant downstream handling. Keep the bag condition, layer pattern, pallet, and handling stage attached to each result.

For a broader discussion of transfer-state confirmation, see the existing case palletizing custody test. That article addresses responsibility at a rigid-case handoff; this review concerns the physical space needed to release a deformable bag and withdraw the tool.

Send EVST a filled-bag sample description, the proposed layer drawing, both tool outlines, and the pallet approach direction. Those inputs make it possible to identify which release positions need a physical clearance trial before a layout is accepted.

Awesome! Share to:

EVS TECH CO., LTD
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.