+86 13438150687

sharonxiao@evsrobot.com
EVS Robotics
Blog
Home /

Blog

| Robot welding cell (Robotic Welding Workstation)
Robot welding cell (Robotic Welding Workstation)  2020-03-13



Robot welding cell (Robotic welding workstation) refers to a group of equipment combination which is mainly composed of one or more robots , equipped with corresponding peripheral equipment , such as positioner , conveyor , fixture , etc , or completed a relatively independent operation or process together with the aid of manual auxiliary operation .


Robot workstation is mainly composed of robot and its control system , auxiliary equipment and other peripheral equipment . In this configuration , the robot and its control system should choose standard device as much as possible , and special robot should be designed for some special occasions . However , the auxiliary equipment such as the end actuator and other peripheral equipment is quite different to different application occasions and workpiece characteristics .

Robot Welding Cell Solution Designing principles .

Because the design of the robot workstation is a relatively flexible technical work with many related factors , we can only abstract the common factors and draw some general design principles.
(1 ) Before designing , it is necessary to fully analyze the operation object and draw up the most reasonable operation process ;
(2 ) The solution must meet the functional requirements and environmental conditions of the operation ;
(3 ) 
The solution must meet the requirements of production rhythm ( production capacity requirements) ;
(4 ) The whole and all components must meet the safety specifications and standards ;
(5 ) Each equipment and control system shall be equipped with fault display and alarm device ;
(6 ) Easy to maintain and repair ;
(7 ) The operating system is convenient for network control;
(8 ) The robot workstation is convenient for wiring ;
(9 )The robot welding cell operating system shall be simple and clear , convenient for operation and manual intervention ;
(10 ) The robot welding cell should be cost effective and with fast production capacity .

These 10 design principles reflect the needs of workstation users in many aspects . In short , it is needed to try the best to meet the requirements of users .


Feel free to contact us for cooperation on industrial robot.

Email:sharonxiao@evsrobot.com     

Mobile/whatsapp/wechat: +86 13438150687          

Youtube channel: https://www.youtube.com/channel/UC6DXCe07c8aaT6W-v94F25w

 

+86 13438150687

sharonxiao@evsrobot.com

+86 13438150687

+86 13438150687

No. 200, Tianfu 5th ST. Chengdu High-tech Zone, China

07SEND MESSAGE

If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

  • >

Home

Products

Who We Are

Contact Us