Technical Parameter
Model | EVS-SWP-P-200 | EVS-SWP-P-500 |
Rated Payload | 200kg(within axis center R300mm) | 500kg(within axis center R400mm) |
Repeat Positioning Accuracy | ±0.08mm | ±0.10mm |
Standard Radius of Gyration | 300mm | 400mm |
Maximum angle of gyration | ±360° | ±360° |
Rated speed of gyration | 70°/S | 70°/S |
Main Axis Gyration Disk Size | φ600 | φ800 |
Dimension(length×width×height) | 770mm×600mm×800mm | 900mm×700mm×800mm |
Height of gyration center | 800mm | 800mm |
Power supply | Three phase 200V ±10% 50Hz (with isolation transformer) | Three phase 200V ±10% 50Hz (with isolation transformer) |
Insulation grade | H | H |
Self weight | about 270kg | about 400kg |
Brief Introduction of Structure
This single axis horizontal servo positioner consists of fixing base, gyration main spindle case, horizontal gyration disk, AC servo motor, RV precise reducer, conductive system, protective cover and electrical control system.
Fixing base is made by high-quality section, the machining was after stress relief annealing so the machining accuracy and the use accuracy are assured. Antirust appearance paint is beautiful and elegant, and the color can be customized.
Gyration main spindle case is made by high-quality section. The stress relief annealing and the machining ensure durability and stability after a long time use.
Horizontal gyration disk is made by high-quality section steel, the machining was after stress relief annealing so the degree of surface finish and the stability are assured. With standard pitch tapped hole on the surface it’s easy to install positioning tooling.
The AC servo motor matching the RV reducer can guarantee the high gyration stability, high positioning accuracy, the long durability, the low failure rate.
We choose brass as the conductive material, because it has good electrical conductivity. The conduct substrate is integral isolated, so the servo motor, robot body, welding power source is completely safe.
Standard Color of Equipment
No. | Item | Corlor Name | Color Number |
1 | Case body and main body | Peacock blue | PB11 |
2 | Base | Graphite gray | 7026 |
3 | Rotating part and cover | Medium yellow | Y07 |
4 | Machined parts and machined surface | Black oxide |   |