Technical Parameter
Item | EVS-TWP-C-1000 | EVS-TWP-C-500 |
Rated load | 1000kg (within axis 2 radius R400mm) | 500kg (within main axis radius R400mm) |
Standard gyration radius of main axis | R1500mm | R1200mm |
Standard gyration radius of auxiliary axis | R500mm | R500mm |
Gyration angle of axis 1 | ±180° | ±180° |
Gyration angle of axis 2 | ±360° | ±360° |
Rated gyration speed of axis 1 | 24°/S | 50°/S |
Rated gyration speed of axis 2 | 70°/S | 70°/S |
Repeated positioning accuracy | ±0.20mm | ±0.08mm |
Dimension of the gyration frame (length×width×height) | 3200mm×1000mm×110mm | 2200mm×800mm×90mm |
Positioner dimension (length×width×height) | 5200mm×1000mm×1850mm | 4500mm×2200mm×1850mm |
Height of axis 1 gyration center | 1500mm | 1450mm |
Power supply | Three phase 200V ±10% 50Hz (with isolation transformer) | Three phase 200V ±10% 50Hz (with isolation transformer) |
Insulation grade | H | H |
Self weight | about 3000kg | about 2800kg |
Brief Introduction of Structure
This three-axis vertical gyration servo positioner consists of whole welding frame, gyration frame, AC servo motor, RV precise reducer, conductive system, protective cover and electrical control system.
The whole welding frame is made by high-quality section, the machining was after stress relief annealing so the machining accuracy and the use accuracy are assured. Anti-rust appearance paint is beautiful and elegant, and the color can be customized.
The gyration frame is made by high-quality steel section with professional machining. With standard pitch tapped hole on the surface for installing positioning tooling, and it was painted after black oxidation treatment
The AC servo motor matching the RV reducer can guarantee the high gyration stability, high positioning accuracy, the long durability, the low failure rate.
We choose brass as the conductive material, because it has good electrical conductivity. The conduct substrate is integral isolated, so the servo motor, robot body, welding power source is completely safe.
Light shield is made by aluminium section and aluminium-plastic panel, it can cover the arc light when the welding and cutting proceeding.
Standard Color of Equipment
No. | Item | Color Name | Color Number |
1 | Case body and main body | Peacock blue | PB11 |
2 | Base | Graphite gray | 7026 |
3 | Gyrating part and cover | Medium yellow | Y07 |
4 | Machined parts and machined surface | Black oxide |
  |